DreadTober 2026 - Week 4 - TO DONE

Well, it's October 31 and my project is complete at last. I'm generally happy with how it came out, especially after a pretty long hiatus from what had become my typical painting regime.

Here's a quick walk around of the model. I decided to go light on the highlights. The metallics pick up a lot of light on their own. But the highlights are there. The model has a lot going on so I tried to keep some details subtle - but the paint job is still pretty busy.
 

So that's DreadTober 2026 in the bag.  I hope my fellow DreadToberteers had as much fun with the challenge as I did! 

Time to lay down the big Seal o' DONE and move on to the next project... 

Cheers and happy gaming!!

DreadTober 2026 - Week 3

 

 Hello and welcome to my DreadTober week 3 update. The project is moving along smartly. I'm working on details and then highlighting and weathering at this point.  IN order to have things tie together and to be more stable, I completed the base enough to glue the model down.

I settled on a straight forward World Eaters scheme for the armor bits. I don't typically include Chaos models in my collection, so I had to source a legion symbol for the shoulder pad.

 All of my Dark Angels bases (30K and 40K) use the same brown base coat, Agrax Earthshade wash, light brown highlights. Simple. Neutral. Effective. At this level of detail I fixed the model to the base with 5-minute epoxy.

The chassis and armor has been fully painted and shaded at this point.Some odd highlights exist here and there circumstantially while I had the right paint on the brush. I like the contrast of the Gold with the Dark silver a lot.

I received the decal sheet I needed just in time to get the World Eaters legion icon on the shield. I "weathered" the rent shoulder pad to appear scorched and scuffed by the rough treatment of the dreadnought's power sword. That was the last thing worked on this week as well. An artsy power blade caricature carried over from earlier GW painting guides, back when Duncan was the face online for GW. It not only carries an other-worldly quality, but also stands out on the table as something special and not just a standard sword blade.  Regardless, it matches the force to date (and my painting recipe above) so there we are.

That's the project so far with a week to go.  The end is in sight.  I went with a simple Custodes icon for the shield, and then matched it on the left shoulder pad for consistency; representing this honored hero's heraldry.

Best of luck to the other DreadTober painters.

Cheers and Happy Gaming!

 

DreadTober 2026 - Week 2

 

Welcome to week two of DreadTober 2026. I was able to make more progress than expected this week.  I realized that the shading was not going to go as planned if I didn't lay down the details first.  So I set about all the embossed details and metalwork that needed to be shaded together.

It all started with the metal exoskeleton under the armor. followed by some detailing of the head while I took a breather from all of that gunmetal.

 The shield got tidied up a bit too, along with some dry brushed highlights.

 Then I needed to work on the other raised details on the armor and tidy up the shoulders.

and from the rear...

 

In the rear pic above, you can see the gold has warmed and darkened, a result of the shading with GW Reikland Fleshshade. The dark metals and white gold wings were shaded with GW Nuln Oil.  Both shades were applied straight from the pot and manipulated a bit with a damp brush.

 

And from the front again after shading.  The head has been glued in, and I started some detail work on the sword hilt w/flamers. I haven't decided if I will paint all of the embossed details - or leave some gold. Also still thinking on the braid and brooch tacked on the right of the chest plate. Taken in all though, the Dread is a lot further along than I anticipated at this stage.

 

 

Things are far enough along that I'm starting on the base so I can glue the model down. I'm blanking on the damaged armor on the base - still thinking Thousand Sons...but...maybe Deathguard?  I like the blue and white... 

 

Anyway, that's where I'm at as week two draws to a close.  I'm feeling pretty good about my chances of completion within the month. Best wishes to my fellow painters.

Cheers and Happy Gaming!

DreadTober 2026 - Week 1

 

 

Greetings, and welcome to DreadTober 2026! Regular readers will know we here at 262Krieg are regular participants in the DreadTober blogger challenge. This year I have taken on the new plastic Contemptor-Galatus dreadnought for the Legio Custodes.

Before priming, I used Vallejo Black Lava to coat the tops of the cork pieces to obscure the "corky" texture. Here a close up of the base from both sides.

 

I added some mark II armor bits for fun. They will be painted in a traitor legion's colors, of course.  Probably Thousand Sons to commemorate the Emperor's sanction on their home world following Primarch Magnus's indiscretions. I hollowed out the helmet as if knocked off or cast aside. I contemplated using green stuff to mold a bit of neck protruding out, but fell short of the experiment.

The base got a base coat of brown using the paint recipe in the tabs above. There will be much washing and dry brushing to come, then the detail work on the armor bits.

Over a black primer coat, I used an airbrush to lay down a base coat of gold.

As shown in the title pic, I then brushed on a base of black over the helmet and shield, and red on the shoulders. This completed week one and the blocking in of the main colors for the piece. Next I'll clean up the details over the black and red, then paint in the dread's iron skeleton. Once that last color is blocked in, I'll paint in the details on the armor and lay down the primary shades over armor and skeleton. That will likely finish week two. Week three should be highlighting and cleanup followed by completing the base and attaching the model to it in week four.

Wish me luck! Drop by from time to time to see the progress as the project unfolds. Then checkout the DreadTober web site to see all the other projects past and present.

Cheers and Happy Gaming!

 

On the Workbench [May/June] - Horus Heresy

 

While poking away, and mostly stalling on completing the Dark Angel's Spartan assault tank, I've been building a few things.

In May I assembled of a squad of the new plastic MkII Breachers.  A typically good kit as we've come to expect from the plastic heresy line.

In June, I picked up the Horus Heresy Legio Custodes Battle Group box and 3.0 codex. These purchases inspired me to break out some older rein models I had in inventory. Here we have Constantin Valdor in all his Forge World resin glory.

Next up I assembled and based a box of Aquilon terminators. I left the armored tops unglued for ease of painting later. Some poster tack is currently securing the parts against loss.

Then I turned to the one model in the battle force box that I was least interested in: the Calidus Annihilator Grav-tank. But during assembly, it really grew on me. It was fun to assemble and is a great looking model. I would never had gone for the resin Forge World version. At some point I'll do something interesting with the base to match the rest of the force.

Next I assembled the Contemptor-Galatus dreadnought.  This will compete with the Saturnine dreadnought for Dreadtober this year, no doubt.  I have always liked the look of this dread and I'm psyched to include it next to my existing resin Contemptor-Achillus.

 

Last up for the month was the Shield Captain from the box. Quite a fancy dude, he is. A joy to build and will be great fun to paint. I'll get on with assembling the remaining 12 models for the two Sodalities in the box.  I definitely got sucked in by the Horus Heresy specific sculpts.  I have been considering my 40K Custodes as double duty, but the differences between the 40k/30k lines and available models have made it worth collecting both for me. 

Super fun, detailed models that will provide a lot of painting enjoyment.  I expect to get started on a few of these once I complete the damn Spartan. :)  I really don't know what's got into me, but I have definitely been struggling to find motivation to sling paint this year.

That's it for now.

Cheers and Happy Gaming!